| |
Tuff-Kote is a dual layer paint finish. A clear, protective finish, modified with a large amount of wax lubricant, is fused to the base coat during the baking cycle.
- Durable satin matte finish.
- More resistant to weather and alkalines.
- Requires less maintenance than other finishes.
- Resists scratching, marring, corrosion and fading.
- Protects against surface damage during installation process.
Color Combinations Available:
White |
|
|
White |
White |
|
|
Ivory |
White |
|
|
Sandstone |
White |
|
|
Adobe |
White |
|
|
Bronze |
Ivory |
|
|
Ivory |
Ivory |
|
|
Sandstone |
Ivory |
|
|
Adobe |
Ivory |
|
|
Bronze |
Patent No.’s 4,769,963 and 5,086,599.
*Note on Colors: If the Snap-N-Lock panel is to be used in a roof application, Structall recommends using the metal color options of Sandstone, Adobe, and Bronze as a bottom skin (install DOWN), with White or Ivory as the top skin (install UP). This will reduce the “thermal bow” effect caused by darker colored metal on a stress skin panel exposed to the sun. |
|
.024 Aluminum Tuff-Kote Gold Paint Finish
Stucco Embossed: White, Ivory, Bronze*, Sandstone* & Adobe*
Cedar Embossed: White or Ivory
Available in the following sizing:
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
1 lb.
1 lb. |
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
1.5 lb.
1.5 lb. |
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
2 lb.
2 lb. |
.030 Aluminum Tuff-Kote Gold Paint Finish
Stucco Embossed: White & Ivory
Available in the following sizing:
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
1 lb.
1 lb. |
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
1.5 lb.
1.5 lb. |
| Panel Thickness (per sq. ft.): 2", 3", 4", 5", 6", 8" |
Panel Width |
48”
23-1/8” |
EPS Foam Core |
2 lb.
2 lb. |
Extruded Beam Laminated Inside Panel
(for 3” panel and thicker)
- Extruded Beam can be custom ordered for placement anywhere in the panel.
(6” from either edge)
- Beam is centered in all Stock Panel Sizes
Install with narrow section of foam UP. |
Beam is surrounded on all sides by foam for better lamination and to reduce telegraphing. |
 |
Panels are custom made. Charged in 6” increments and available up to 32’ in length. |
|
