• 18v cordless drill/impact driver w/ 2 Battery Packs & Charger (2 preferably).
  • ¼” & 5/16” Hex Magnetic Driver Bits (2 per person) for #10 screws.
  • T30 Square Drive Driver Bit (2 per person) for roof screws.
  • Assorted Drill Bits for metal (uni bit) magnetic impact screwdriver bits for screws.
  • 3/8” long drill bit for opening corner marking.
  • Rotary Hammer Drill w/ 3/8” SDS bit. for concrete anchors.
  • Metal Cutting Circular Saw with steel cutting blade (eye protection a must).
  • Miter Saw with 60 tooth min. carbide blade (metal nonferrous blade).
  • Sledge Hammer (8 lb. minimum) & a short piece of 2x4 wood Stud.
  • Caulk gun.
  • PVC cutter (wire with Handles) for foam cutting.
  • 6” Putty knife (1 per person) for panel fitting.
  • 12-14” drywall taping knife for panel fitting.
  • Drywall Rasp for foam rasping.
  • Sheet metal shears regular & offset.
  • Wide jaw sheet metal pliers.
  • Needle nose pliers.
  • Box knife (1 per person) for packaging removal.
  • Tall A Frame ladder (2 preferably).
  • Eye protection.
  • Gloves (1 pair per person mandatory).
  • Ear protection.
  • Chalk Box (NO RED CHALK).
  • Speed Square (preferably 1 per person).
  • 25’ High Quality Tape Measure each man.
  • 2’ 4’ Box Level preferably magnetic (window openings etc.).
  • Wearable screw pouch (1 per person mandatory).
  • Hammer (smooth face).
  • Bastard File for smoothing cut edges.
  • 96” magnetic box level for plumb and level on walls.
  • 150’ Fiberglass Tape for layout and checking slab for square etc.
  • Felt tip markers (Sharpie) each person for marking metal studs and panels.
  • Sun Block.
  • Fall safety protection PSD for roof application.
  • First Aid kit.
  • Masonry scaffolding 5’ with 8” smooth wheels enough sections to reach underside of panels.
  • 3 aluminum planks.
  • 2x material for protecting steel panel floor from scaffold wheels.
  • 24” Flat Pry Bar (2).
  • ½” Drive Ratcheting Socket set with deep set sockets for anchor bolt setting.
  • (Torque Wrench) prevents over tightening bolts.
  • Soft sole shoes for walking on panels for traction.